Aquascan 700 - Leak Locating Correlator

Colour touch screen
The AQUASCAN 700 is the first portable correlator with a colour touch screen allowing easy handling and field data input.

Simple visual interpretation
A large 10" colour display offers simple visual interpretation of complex measurement analysis

Simultaneous multiple correlation
The AQUASCAN 700 is capable of presenting simultaneous correlation of up to 12 different frequency bands.

Multiple frequency suppression
Each individual frequency band can be included or excluded by a simple touch of the screen. Gutermann's range of high-end AQUASCAN models are the only correlators offering multi frequency suppression, the most sophisticated in-depth frequency analysis ever realized in a high performance correlator, providing results where other correlators fail.

High locating precision
The measuring resolution of 16,000 points allows a very accurate pinpointing (locating precision better than 1 cm per 100 m, or 1" per 1,000 ft).Improved performance on uPVC and MDPE
PVC and MDPE pipes have long been a problem for conventional correlators. The AQUASCAN 700 offers enhanced capabilities for more difficult low noise and low frequency leaks.

Detailed leak noise analysis including FFT and coherence
The detailed leak noise analysis displays the presentation of the FFT of each sensor as well as the coherence showing the noise frequencies, which are common to both sensors. This enables the user to fine-tune the filter settings and to eliminate disturbing ambient noises.

Peak suppression eliminates interfering noise sources
Accidental or permanent consumption on the pipe section under investigation is a frequent problem for conventional correlators, often rendering leak detection impossible. The AQUASCAN 700 enables the suppression of any pipe subsection or correlation peak caused by disturbing non-leaks sources, such as water consumption.

Automatic calculation of sound velocity
The AQUASCAN 700 is capable of calculating the real sound velocity of a pipe section where the material and diameter is unknown.

Large memory
The large memory stores up to 140 measurements including all FFT and coherence data, permitting subsequent off-site re-correlation of the measurements with the new or changed parameters.

Professional reporting with immediate print-out
A comprehensive report of the leak detection can be printed out on site, including a drawing of the site-plan with just a few simple touches on the screen.

System configuration 1 AQUASCAN 700 correlator 2 Remote transmitter units 3 Antennae 2 High sensitivity piezo-ceramic sensors with magnetic fixing 1 Stereo headphones 1 Connecting cable to a 12 V vehicle cigarette lighter 1 Operating manual 1 Year warranty

Optional accessories 2 Hydrophones 1 Car roof antenna

Technical specifications Pipe material: All common pipe materials; mixed material mode with unlimited number of pipe sections Sound velocity: User-adjustable sound velocity table and automatic computation of the real on-site velocity Measurement time: 3 sec. Or more depending on distance and required accuracy Correlation resolution: 16,000 points Correlation accuracy: 1 cm for 100m (1" for 1,000ft) Correlation method: 16 bit amplitude correlation Filter: Automatically selected, manually infinitely adjustable Frequency analysis: FFT, coherence and 2 - 12 user defined frequency bands Frequency response: 1-5000 Hz Peak suppression: Unlimited, user-selectable Sensors: Extremely sensitive piezo-ceramic sensors with magnetic pipe fixing, sensitivity 10 V/g Memory: 140 correlations, including FFT and coherence data for off-site re-correlation with altered parameters Reporting: Full report of all measurements data, including manual drawing of site conditions Power: Interchangeable 7.2 V power packs Battery charging: Vehicle or indoor Battery charge life: 3 hours Interfaces: RS 232, sockets for antenna and headphones Dimensions: Correlator unit: 28.5 x 31.5 x 7.5cm (11.4 x 12.6 x 3") Transmitter: 22 x 19 x 9cm (8.8 x 4.8 x 3.6") Sensors: Ø 4.5 x 13 cm (Ø 1.8 x 5") Weight: Correlator unit: 3 Kg (6.5lb.) Transmitters: 2.7 Kg (5.9lb.) Sensors: 0.75 Kg (1.6lb.)

Back to Top >>>