Download brochure ..

Correlux P2 Leak Noise Correlator

You are here: Products > Leakage Detection > Portable Leak Noise Correlators > P2

Technical Data

Correlux P-2

Processor

RISC- und DSP- processor

Display

320 x 240 Pixel, 0.25" VGA monochrome

Data entry

Rotary encoder with enter function

Power supply

Internal Akku, NiMH, external 12 V DC (car- adapter), 100- 240 V AV

Operating- / charging time

> 18 h / < 3 h

Interface

RS 232 (updates, print out and data communication via PC)

Connections

Sensor/ Hydrophone direct connection, antenna, headphones/ recharging, charging contacts in case

Protection class

IP 67

Operating temperature

-20 °C ... +60 °C

Dimensions/ weight

270 x 130 x 240 mm / 3.3 kg

Transmitters TR A/ TR B

Display

LCD, 2 x 16 characters

Readout

Battery state, noise level, system state

Buttons

On/ Off, lighting, volume

Radio frequency

433 MHz

Transmitter power

<500 mW

Operating- / charging time

> 18 h / < 3 h

Power supply

Internal Akku, NiMH, external 12 V DC (car- adapter), 100- 240 V AV

Connections

Sensor, antenna, headphones

Protection class

IP 67

Operating temperature

-20 °C ... +50 °C

Dimensions/ weight

190x134x180mm bei 1,7kg

Sensors PAM CORR

Sensors PAM CORR

Piezo sensors with active amplifier

Adapter

Magnet adapter

Operating temperature

-20 °C ... +80 °C

Dimensions/ weight

38 x 78 mm / 0.4 kg

Correlux P2 Leak Noise Correlator

Functional description

The correlator Correlux P-2 is used for leak location on pipes for potable water. Water, escaping from a leak under pressure creates a noise which travels into both directions of the pipe. This noise is recorded by two sensors (piezo- microphones, hydrophones) attached to the pipe ( e. g.: valves, hydrants), amplified and transmitted to the correlator. The Correlux P-2 compares both signals (correlation) and calculates the exact distance to the leak by use of the signal delay, the sensor distance and the sound velocity.

  • Easy handling with rotary encoder
  • Rugged and compact design
  • Simultaneous display of the correlation chart and the coherence spectrum (FFT- analysis)
  • Quick filter optimisation without using menus
  • Fast and easy leak identification by using the overview measurement with unknown pipe parameters
  • High radio output for broad reach
  • Transmitter and correlator with direct headphones plug-in to listen live to the leak noise
  • Recharging the complete system in the closed case – direct charging is possible, too
  • Up to 6 pipe sections measurable
  • Active piezo ceramics accelerometers, best suited for plastic pipes
  • Automatic and manual filter adjustment 0 ... 4000 Hz
  • Reliable measurement results
  • Easy to use
  • Optimised for plastic pipes
  • Long operating time
  • Sensor can be connected to the central unit
  • Sturdy housing

Scope of Delivery

Correlux P-2

P2 Basic

P2 Standard

P2 Pro

DK P2 Correlator

X

X

X

TR A transmitter + sensor

X

X

X

TR B transmitter + sensor

 

X

X

Headphones

X

X

X

Ground microphone

 

 

X

Transportation case

Option

X

X

Recharger

X

X

X

Hydrophone

Option

Option

Option

Vehicle charger

Option

Option

Option

Software

 

 

 

Listening mode

 

 

X

Chart memory

 

X

X

PC software

 

X

X

 

Steller Technology Low Vision Specialists